1、Set the temperature（rotate the temperature adjustment knob（9））.
2、Set the walking speed（rotate the walking speed adjustment knob（5））.
3、Turn on the blower power switch (8）.
4、When the temperature of the air gun reaches the set value, insert the air nozzle（1）
between the upper film and the lower film to be welded（as shown below）.
5、Press the handle（3）with your hand.
6、Turn on the moving switch (6).
7、The machine should pay attention to the pressure roller（2）edge and the relative
position of the edge of the film.
8、After welding, lift the machine slightly and move the air nozzle（1）away from the
welding position.
9、Turn off the moving switch (6).
10、Turn off the air blower power switch (8) after the air blower cools down .
LST-TAC Operations
1、Nozzle
2、Pressure Roller
3、Handle
4、Main Power Wire
5、Walking Speed Adjustment Knob 6、Moving Switch
7、Hot Air Blower Power Wire 8、Blower Power Switch
9、Temperature Adjustment Knob 10、Hot Air Blower
11、Crawling Wheel
04
LST-TAC
LESITE
EN
