LST-T004 Screen Data
LST-T004 Operations
04
LST-T004
LESITE
EN
537 N
18.0
mm
4 N
0.0
mm
MAX-F
MAX-L
Current-F
Current-L
1、The data below MAX-F is the maximum tensile force displayed by the broken
material in this test, which can be retained all the time.The unit of data is N
(can also be displayed in KGS, which can be switched by the unit switching (3)).
2、The data above MAX-L is the maximum walking distance displayed in this tensile
material test, which can be retained all the time. The unit of data is mm.
3、The data below Current-F is the current tensile data. The data unit is N (can also
be displayed in KGS, which can be switched by the unit switching (3)).
4、The data above Current-L is the current distance data. The unit of data is mm.
1、Open the cover of the tensiometer, take out the power cord, check whether the
power cord is in good condition, and connect to the power supply
2、Turn on the machine power switch(1).
3、Prepare base material samples for testing.
4、Use a screwdriver to loosen the 4 test sample compression screws (12) on the
movable plate(14), and then insert the prepared base material sample into both
sides of the machine respectively.
