Lervia KH 1148, Руководство по эксплуатации

Страница: 8 / 12

- 6 -
KH 1148
Delivery content
Fan Heater
Operating instructions
Warranty card
Device Overview
Carrying handle
Switch for the oscillating function
Function switch
Control lamp
Protective grating
Safety switch
Base
Thermostat regulator
Technical data
Mains voltage: 220-240V ~ 50Hz
Output:
Heating level 1:
1000 W
Heating level 2: 2000 W
Protection class: II
Before the first use
• Take the Fan Heater from the
transport packaging.
• Remove all packaging material.
Plastic bags can be dangerous.
To avoid the chance of suffocations,
ensure that they do not come into
the possession of children.
• Check the items to see that they are
all present, complete and without
any damage.
• Place the Fan Heater on a level
surface.
• Insert the plug into a wall socket.
The Fan Heater is now ready for service.
Safety
Tilt cut-out
This Fan Heater is fitted with a safety
switch
. Should the Fan Heater tip
over, it switches itself off automatically.
The Fan Heater first switches itself on
again when it is in an upright position.
Overheating protection
The Fan Heater is fitted with overhea-
ting protection. In the event of over-
heating, it switches itself off. Should
this happen, check to see if the protecti-
ve grating is covered or blocked. Switch
the Fan Heater to the position „0“. Wait
until it has cooled down before swit-
ching it back on.
Operation
To use the ventilator function:
• Place the function switch
into
the position Fan .
• Place the thermostat regulator
on HI.
To use the heating function:
• Place the function switch
to the
desired heating level, 1 or 2.
KH1148_Heiz_IB_UK 10.08.2006 11:52 Uhr Seite 6