
5 - Click on «
Generate file
».
6 - Click on the link ezconfig.bin and save the file named «ezconfig.bin» on the USB thumb
drive.
7 - Switch on the ELECTROvet EZ : only the blue LED comes on
8 - Plug the USB thumb drive which contains the file into the USB port of the device.
9 - The device reads new parameters and installs the update.
When it’s done
blue
and
green
LEDs flash. The update is complete.
If
blue
and
orange
LEDs flash, there is an error in your setting and the parameters aren’t
changed.
/
26 27