leptron RDASS HD2, Руководство по эксплуатации самолета

Страница: 54 / 64

48
9. FLIGHT CHECKLIST
PRE-FLIGHT CHECKS
1 Conduct Crew Brief
2 Install SD Card(s)
3 Radio Controller Checks
Radio Controller Mode Switch
– Set to “P”
Radio Controller Power Switch
– On
Radio Controller Voltage
– Check 3 LEDs Minimum
4 Tablet Checks
Tablet Cable
– Attach to Remote Control
Tablet
– Power On
Tablet Battery
– Check (greater than 50%)
GoApp
– Launch
Satellites
– Verify Minimum 8(status bar reads “Safe to Fly” in green)
Transmit Signal Strength
– Verify 4 Bars Minimum
In Settings, HD
– Verify EXT Port Enabled
5 Flight Battery Installation
Flight Battery
– Check and Record Voltage (25.0 Volts minimum)
Flight Battery
– Install with Velcro Strap
DO NOT CONNECT BATTERY AT THIS TIME
Gimbal
– Check Freedom of Movement
6 Mechanical Checks – Bottom
Landing Gear
– Check
GoPro Bracket
– Check
Gimbal Rubber Mounts - Check (4 zip ties)
Ribbon Cables
– Check (Gimbal and GoPro)
GoPro
– Power on and Record if Desired
Underside
– Check for Worn/Loose Items
7 Mechanical Checks – Top
Main Rotor Nuts
– Check Tightness (Hold motor housing)
Antennas
– Attach
Motor Mounts and Arms - Check Security and Verify Level/Plumb
Rotor Blades
– Check Condition
Flight Preparation
Place aircraft on Level Non-Metallic Surface
LED (Tail) Toward Operator
– Verify
Flight Battery
– Connect (outside of skids)
Compass Calibration
– Complete First Flight of the Day, Cycle Power