GB
|
1
INTRODUCTION
Intelligent microprocessor emulator DPF/FAP with a dynamic pressure sensor emulation and
emulation up to 3 temperature sensors, and function emulation warm temperature sensors.
Emulator DPF / FAP is the solution for cars that have a problem with DPF/FAP.
It is applicable wherever the filter is damaged, clogged or is physically removed.
Emulator allows the operation of a car without a physical filter. With it, the car does not enter
into emergency mode.
Installation involves the physical removal of the DPF and plug the emulator to the sensors in the
car (pressure sensor, temperature sensors).
The emulator is fully customizable. Configuration, diagnostics and software update emulator is
possible using the service software from a PC via the USB interface.
Emulator is designed specifically for the automotive market, it is resistant to high and low
temperatures, humidity.
TECHNICAL DATA
Power Supply
12V ±25%
Operating temperature
-40..90°C
Tightness class
IP66
ASSEMBLY
NOTE!
Any Assembly or changes in the installation should be performed without fuse
Mounted vertically down while safeguarding against contact with water
Mount away from strong sources of heat (i.e. the engine block or in the vicinity of the
exhaust manifold).
Mounted away from the ignition and high voltage cables
