LEPARD EM.034, Руководство по эксплуатации

Страница: 3 / 4

GB |
1
INTRODUCTION
Relay time of smooth adjustable delay time to switch.
Time relay may be used in any electrical circuit. Maximum load relay may not exceed 40A.
Built-in potentiometer regulatory controls regulating the delay time of switching relay from 0 to 10
seconds.
In a State of rest Compact are the contacts with
30-87a relay see figure . A .. dose voltage 12V on pin 86
(+) after a fixed time relay is switched and the contacts with 30-87 are compact, see figure A ..
Relay time with smooth regulated time switching from 0 to 10 seconds.
Time relay may be used in any electrical circuit. Maximum load relay may not exceed 40A.
Built-in potentiometer regulatory controls regulating the delay time of switching relay.
The relay can be used in any electrical circuit, e.g.:

installations automotive,

installations LPG/CNG,

installations of industrial automation,

alarms,

etc.
TECHNICAL DATA
Power Supply 12V ±25%
Operating temperature -40..90°C
The range of adjustment of time switch 0..10sek
Maximum load of the circuit relay 40A
Tightness class IP66
ASSEMBLY
1. Mount the relay in accordance with diagram A .
2. The Example of connecting delay shutting down the fuel pump in vehicles with the LPG/CNG
installation are in the organization
B ..
NOTE!

Mounted vertically down while safeguarding against contact with water

Mount away from strong sources of heat (i.e. the engine block or in the vicinity of the exhaust manifold).

Mounted away from the ignition and high voltage cables