Introduction
The 100 Watt per channel Lepai LP7498E Stereo Amplifier provides clean
Class D power from a small package. Powered by an included 36Vdc supply
and connected to 8 Ohm speakers, this amplifier will fill any office or shop with
music. And, with the added convenience of Bluetooth wireless you can move
freely from system to system without dragging cords around with you.
Connection
Connecting Speakers
The LP7498E features binding posts for more convenient speaker connection.
These binding posts will accept bare wire, 3/8
"
spade terminals, or standard
banana plugs.
Note:
The binding posts are 5/8
"
on center.
Using Line Level Input
Many portable music players use a 3.5mm jack to play music through headphones.
Connect a 3.5mm to RCA cable between the source headphone out and the
amplifier’s line input. If the source device is not portable it likely uses RCA stereo
cables. Connect a stereo audio cable from the source device to the amplifier’s
line input.
Using Bluetooth Connection
The Bluetooth audio source device must be paired and connected to the LP7498E
to play music wirelessly from your phone, tablet, or other music player.
Amplifier
● Turn the power switch to “Off”
● Set the select switch to “Bluetooth”
● Turn the power switch to “On”
Mobile Device
● On your mobile device select “HiFi” from available devices to pair the devices
● From “Paired Devices” list select “HiFi”
● Under Settings, select “Use for media audio” if applicable
● The LP7498E will emit a beep to inform you that the mobile device is paired
and selected.
Adjust the output level of the mobile device to approximately 75% for best sound
quality and adjust the master volume on the amplifier to set the ideal listening level.
Note:
Some Bluetooth devices will have trouble pairing and connecting to the
amplifier, this is common with Bluetooth audio devices. It may be necessary to
repeat all of these steps for the amplifier and mobile device several times before
the amplifier will play music from the mobile device.
Operation
●
Connect 8 Ohm speakers to the binding posts
●
Plug the power supply into the amplifier then into the wall outlet
●
Connect a line-level device to the RCA inputs and set input to “Select”
●
Turn on the amplifier and pair a mobile device with the Bluetooth connection
and set the input to “Bluetooth”
●
Adjust the volume to the desired level and enjoy your Lepai LP7498E
Specifications
Power Output
100 Watts x 2 @ 10% THD
Impedance
8 Ohms
Power Input
18 ~ 36 Vdc
Amplifier Class
Class D
Bluetooth Class
Class 2
Bluetooth Distance
Up to 20 meters
Bluetooth Compatibility
A2DP, AVRCP