LEOPOLD CO.,LTD. www.leopold.co.kr
2
To connect to a computer
(USB interface model)
1. Plug the keyboard cable into the computer USB port.
2.You do not need to turn off your computer when connecting the USB interface model.
3. Depending on your OS, your USB keyboard will automatically be recognized, and a standard keyboard
driver will be installed. Your OS install CD may be needed.
4. In some cases, your keyboard may not be recognized after your computer has been in Suspend mode .In
this case, please disconnect, and connect your keyboard to re-establish recognition.
.
Keyboard Setting
To use your FC660C Keyboard, your keyboard layout should be set to the 104Keyboard or Natural Keyboard
setting.
Specifications
Specifications
Item
USB interface model
Interface Type
USB1.1 (Cable Length 3m Max)
Key Specifications
Electric capacity(4.0mm stroke)
Cable Length
1.5 m
D i m e n s i o n s
325.3mm(W) x 109.36mm(D) x 21.0mm(H)
W e i g h t
650g
#USB cable should use a shield type.
#These specification may change without notice in order to facilitate improvements.
Troubleshooting
If you have any problems, questions or suggestions, please check our Web Site or contact our Customer
Support for assistance.
When contact, please provide us for the following information:
Date and place of purchase
Brand and model of computer
Support:
Address:#1607Youngsung Biztel,314,Hangganro-2ga,Yoyngsan-gu,Seoul,Korea,140-750
Tel:+82-2-2077-1030
eMail:[email protected]
