Leopard Imaging Inc.
2
1130 Cadillac Ct
Website:
www.leopardimaging.com
Milpitas, CA 95035
0.
Introduction.
The PDF version of this document can be found at the link below.
https://www.leopardimaging.com/uploads/Leopard_USB_30_Camera_Kit_Quick_Start_Guide_M114.pdf
The Leopard Imaging USB 3.0 Camera kit, bundled with Cypress EZ-USB FX3
CYUSB3KIT-001 Development Kit, enables the Cypress USB 3.0 platform to interface
with the Leopard Imaging LI-CAM-M114 Camera Board. The kit includes the LI-
USB30-ADAPTER board as well as the LI-CAM-M114 camera board.
This document briefly illustrates the procedure to set up and run the USB 3.0 Camera
demo.
LI-CAM-M114
LI-USB30-ADAPTER LI-USB30-ADAPTER (Back Side)
1.
Setup procedure
This procedure assumes that the user has already installed the EZ-USB FX3 SDK as well
as the driver for Cypress USB Boot Loader and has the EZ-USB FX3 development board.
Please follow the procedure below to set up the USB 3.0 camera demo.
a.
Mount the camera board to the LI-USB30-ADAPTER. Please note that pin 1 of the
camera board should be connected to pin 1 on the adapter board as shown in the picture
