10
Figure 2.4: Remove LC Connector
Step 2
Push down the metal clasp and pull the transceiver out by the plastic part as shown below
in Figure 2.5
Figure 2.5: Pull Out from the SFP Module
Wiring the Power Inputs
Caution:
Please follow the below steps to insert the power wire.
Step 1
Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-)
contacts on the terminal block connector as shown below in Figure 2.6.
Figure 2.6: Power Terminal Block
