Leonton MEG2-0201-M Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 20

Leonton MEG2-0201-M Series Скачать руководство пользователя страница 20

16

Trouble Shooting

●

Verify you have the right power cord or adapter. Never use a power supply or adapter with a
non-compliant DC output voltage or it will burn the equipment.

●

Select the proper UTP or STP cable in order to construct the network. Use an unshielded
twisted-pair (UTP) or shield twisted-pair (STP) cable for RJ-45 connections: 10

0Ω Category 5e

for 10M/100/1000Mbps. Also be sure that the length of any twisted-pair connection does not
exceed 100 meters (328 feet).

●

Diagnosing LED Indicators: To assist in identifying problems, the Media Converter can be easily
monitored with the LED indicators which help to identity if any problems exist.

◆

Please refer to the LED Indicators section for LED light indication.

●

If the power indicator LED does not turn on when the power cord is plugged in, the user may
have a problem with the power cord. Check for loose power connections, power losses or
surges at the power outlet.

◆

Please contact Leonton for technical support service, if the problem still cannot be
resolved.

●

If the industrial Media Converter LED indicators are normal and the connected cables are
correct but the packets still cannot transmit, please check the system’s Ethernet devices’
configuration or status.

«
...
18
19
20

Содержание MEG2-0201-M Series





















Отзывы:

Нет отзывов