manualshive.com logo in svg

Leonton GINJ-0201-EBT-T, Руководство пользователя по оборудованию

Поделиться
Скачать
Leonton GINJ-0201-EBT-T Скачать руководство пользователя страница 19

 

 

TROUBLE SHOOTING

 

● 

Verify you have the right power cord or adapter. Never use a power supply or adapter with a non-
compliant DC output voltage or it will burn the equipment.

 

● 

Diagnosing LED Indicators: To assist in identifying problems, the unit can be easily monitored with the 
LED indicators which help to identity if any problems exist.

 

◆

 

Please refer to the LED Indicators section for LED light indication.

 

● 

If the power indicator LED does not turn on when the power cord is plugged in, the user may have a 
problem with the power cord. Check for loose power connections, power losses or surges at the 
power outlet.

 

◆

 

Please contact Leonton for technical support service, if the problem still cannot be resolved.

 

● 

If the industrial injector LED indicators are normal and the connected cables are correct but the 

packets still cannot transmit, please check the system’s Ethernet devices’ configuration or status.

 

 

For any repair or maintenance needs, please contact us. 

LEONTON TECHNOLOGIES, CO., LTD 

9F-1, No.43, Fuxing Rd., Xindian Dist.,  

New Taipei City, 231,  

Taiwan 

TEL: +886 2 22183113 

FAX: +886 2 22187391 

Содержание GINJ-0201-EBT-T




















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды