Leonardo LN2T/1TS-B5-CP, Руководство по предварительной установке и установке

Страница: 3 / 44

Ed. 0121 - 70702551 REV03 Leonardo - Installation
3
Fig.1.
B
A
1 2
3
A = 690 mm [27.17 in.] (2T)
825 mm [32.48 in.] (3T)
1145 mm [45.08 in.] (650)
B = 825 mm [27.17 in.] (2T)
825 mm [32.48 in.] (3T)
1145 mm [45.08 in.] (650)
1
CHECKS BEFORE PURCHASING
A
Check with the owner if in the place of installation there are the tools and instruments to easily lift and transport the oven
Fig.1.
√ To lift and handle the oven it is necessary that:
•
there is
lifting equipment
available, able to lift and move the equipment safely (check the weights and dimensions in the "Technical data" section starting from page
6
) as well as
qualified personnel to carry out this operation;
•
personal protection equipment is available (e.g. safety shoes, gloves, etc.)
•
there is a frame available to be hooked to the eyebolts of the oven (supplied) to lift the equipment. The frame is not supplied by the Manufacturer and must therefore be obtained by
the installer; it must be constructed with material, measurements and thickness suitable for lifting the equipment safely without causing damage to persons or to the equipment itself.
It is absolutely forbidden to lift or move the equipment using a single coupling point as this would cause serious structural damage to it.
correct
lifting with frame
(not supplied)
incorrect
lifting with a single
coupling point
eyebolts
supplied
by the
Manufacturer
(they are
inside
the oven
chamber)
Lifting from the
ground must be
perpendicular to
the ground itself and the
tension of the eyebolts
must be vertical
Before purchasing the oven and before its installation,
check and agree with the owner
that, on installation, all the following conditions are met; they are indispensable for the correct and safe
installation, operation and maintenance of the oven