Lenze Teachware 8400, Руководство пользователя

Страница: 18 / 28

Safety instructions
18
Teachware 8400 - Application case (2-axis) - DOC 80100005 - DE EN 04.2020
EN
1.2. Residual hazards
Even if notes given are taken into consideration and protective measures are implemented, the oc-
currence of residual risks cannot be fully prevented. The user must take these residual hazards men-
tioned into consideration in the risk assessment.
Observe the warning labels on the product!
Symbol Description
Dangerous voltage: Before working on the product, disconnect the mains plug
and check that all power connections are de-energized. Observe the waiting time
indicated on the inverter. Special danger at terminals X100 and X105. Never pull
the motor plug while it is live.
Danger from rotating parts: Risk of injury at the flywheel mounted on the motor
shaft. Special danger at motor speed greater than 150 rpm. Risk of injury with
skin abrasion or burning.
Risk of crushing! Risk of injury during transport, parking, opening or closing of
the teachware.
General hazard area : Observe the documentation. Never operate the teachware
without supervision.
1.3. Application as directed
The Lenze Teachware 8400 - Application case (2-axis) – hereafter referred to as “teachware” – …
•
… is designed exclusively for demonstrations and test purposes and may only be operated in
accordance with the conditions of use prescribed in this instruction.
•
… is not a household appliance and is only intended for commercial use and/or as profes-
sional equipment in the sense of EN 61000-3-2.
•
… meets the requirements of the Low Voltage Directive 2014/35/EU.
•
… is not a machine within the meaning of the Machinery Directive 2006/42/EU.
Any other use shall be deemed inappropriate!
1.4. Foreseeable misuse
Do not use the teachware …
•
… in explosion -protected areas
•
… in aggressive environments (acids, gases, vapors, dusts, oils)
•
… under water
•
… under radiation
In residential areas, the product may cause EMC interferences. The operator is responsible for taking
interference suppression measures.