Lenze MSEMA 063-42 Series, Инструкции по монтажу и включению

Страница: 60 / 80

Electrical installation
Important notes
DANGER!
Hazardous voltage!
On the power connections even when disconnected from the mains: residual voltage >60 V!
▶
Disconnect the product from the mains and wait until the motor is at a standstill.
▶
Make sure that the product is safely isolated from supply!
•
When working on energised products, comply with the applicable national accident prevention regula-
tions.
•
Carry out the electrical installation in compliance with the relevant regulations (e.g. cable cross‐sections,
fuses, PE connection).
•
The manufacturer of the system or machine is responsible for adherence to the limits required in connec-
tion with EMC legislation.
WARNING!
▶
UL marking
▶
Suitable for motor group installation on a circuit capable of delivering not more than 5k rms symmetrical
amperes, 480 V maximum.
▶
When protected by fuses rated, see table below.
▶
When protected by a circuit breaker having an interrupting rating not less than 5k rms symmetrical
amperes, 480 V Maximum, see table below.
▶
Marquage UL
▶
Convient aux circuits de groupes moteur non susceptibles de délivrer plus de 5k ampères symétriques eff,
maximum 480 V.
▶
Avec une protection par des fusibles du calibre indiqué dans le tableau ci-dessous,
▶
Avec une protection par un disjoncteur à courant de coupure assigné d’au moins 5k ampères symétriques
eff, maximum 480 V, voir tableau ci-dessous.
Preparation
The notes for the electrical connection can be found in
in the terminal box (if motors with a terminal box are used).
the connection plan (if motors with connectors are used).
Electrical installation
Important notes
60