LW100 Input Board
5
DIGITAL plus
If on the other hand you press the right key, then this activates the
“-” terminal of output 1 of the LS100/110 programmed for turnout
addresses 33 to 36.
The terminals labeled “PLUS” and “MINUS” are designed as
double terminals, in case you need to connect several wires.
Please note that you must not connect the “PLUS” and “MINUS”
terminals of one key module with the same terminals of another
key module!
Version 2:
You first choose “Diverge” (“Stop”) or “Straight” (“Go”) with a group
key. Keeping this key pressed, you then also press a single key at
the turnout (signal). This version uses fewer keys total.
This wiring setup is shown in illustration 2. The two keys circled
are group keys, the boxed keys identify the turnout.
