Lenz 10310-02, Информация

Страница: 38 / 60

38 Information SILVERmini + S.U.S.I.
2 (1) 1 ABC activated 0
3 (2) 1 ABC direction-dependency deactivated 0
4 (3) 1 Activate push-pull operation without intermediate stop 0
5 (4) 1 Activate push-pull operation with intermediate stop 0
6 (5) 1 Stopping with DC independent of the polarity (only if Bit 3 is
deleted in CV29).
0
7–8 (6-7) Not used 0
8 (7) 1 Constant braking distance with speed step 0 activated
52 0-255 Braking distance with activated constant braking distance 50
53
0-255 Slow approach with ABC 48
54 0-255 Stopping time in push-pull operation, 1 to 256 sec 4
55 0-255 Sets brightness at function outputs A, 255=max 255
56
0-255 Sets brightness at function outputs B, 255=max 255
57
-
59,
61
Function mapping:
Each bit of the CV stands for a function of the digital system:
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
Bit 8(7) for function 8. If you wish to allocate a function to the
dimming, the respective bit must be set.
57
0-255
Dimming (no ex-works setting)
0
58 0-255 Shunting speed (ex-works setting F3) 4
59 0-255 Switching off the delay (ex-works setting F4) 8
60 0-255 Lighting effect at function outputs A and B. The units digit of the
value stands for function output A, the tens digit for function
output B: 0