Press and hold this button for 3 seconds to turn it on
7.
Last Track/V-:
Press this button repeatedly to decrease the volume.
Press and hold this button for 3 seconds to move to the previous music track.
8.
V+/Next Track:
Press this button repeatedly to increase the volume.
Press and hold this button for 3 seconds to move to the next music track.
9.
TWS
（
True wireless
）
pairing button: Use this button for pairing two BTW80 speakers for stereo
playback.
10.
Play/Pause button. Press once to pause playback, press again to resume playback.
Charging:
Before using the speaker, it needs to be charged. Charge it using the micro USB charging lead
included in the package. Plug the small micro USB socket into the charging port on the side of the
speaker, and the other end of the lead (the standard USB2.0 plug) into any standard USB charger.
The LED light indicator will be red when charging. When it is fully charged, the LED indicator will
be off. The speaker can be charged while playing music.
The full charging time is 5 hours.
Music playback is up to 14 hours*.
BT Pairing
Turn on your speaker. The mode LED indicator on the control panel will flash white. Enable your
BT device such as smart phones, tablets, or other BT media and ensure it is in searching mode.
Select
BTW80
from the list shown on your BT device. The LED light will be White lighting when BT
connected successfully. When you play music, the white led light will flash slowly.
Aux in
Use the 3.5mm standard audio lead to connect an external audio source. E.g. MP3 player with an
earphone jack. Connect one end of the aux in lead to the earphone socket of your device and
connect the other end of the aux in lead to the aux in port of the speaker. Then begin music
playback on your device.
TWS Function:
BTW80 supports TWS (True wireless) function, which allows the pairing of two speakers together
to play sound in stereo mode.
1.
Speakers must be disconnected from other Bluetooth devices before TWS Pairing.
2.
Turn on two BTW80 speakers and keep them in near distance.
3.
Take one of the speakers as the main, press and hold TWS pairing button
for 3 seconds,
