•
The unit may become hot during operation. Always leave sufficient space around the unit for
ventilation.
•
The voltage supplied to the unit should match the voltage that is printed on the back panel.
If you have any doubts concerning this matter, consult an electrician.
•
Avoid placing the unit in direct sunlight or close to any sources of heat. Also avoid locations
subject to vibrations and excessive dust, heat, cold or moisture.
•
Do not expose the unit to water.
•
Do not place the unit on an amplifier or receiver.
•
Do not open the cabinet as this might result in damage to the circuits or an electric shock. If
a foreign object gets into the unit, contact your dealer or service company.
CAUTION:
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT THIS.
•
This unit utilises a laser.
•
The use of optical instruments with the unit will increase eye hazard, as the laser used in the
CD plater is harmful to eyes.
•
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
•
Do not attempt to disassemble or repair the unit; refer servicing to qualified personnel only.
•
This unit is classified as a class 1 laser product.
•
The class 1 laser product marking is located on the laser protective housing inside the
enclosure.
