www.lenoxx.com.au
8
Operation
1.
Place the Evaporative Cooler on a level, dry surface.
2.
Open the water tank cover and pour in clean water or ice. If you use ice, you will actually get a cooler air
temperature. Do NOT fill the water tank above MAX level indicator in the water tank.
NOTE: If fresh water/ice is required for next use, (or to empty the water tank) place a water container or bucket
under the plug hole (found on the bottom of the unit) and remove the rubber plug. The residual water will then
drain out from the water tank.
3.
Select the wind speed by pressing the SPEED button. Please note the default wind speed is medium when
you first press the
ON button.
4.
Press the MODE button to choose your desired setting.
5.
Set the timer by pressing the TIMER button. The minimum setting is 0.5hr and maximum is 7.5hr.
6.
To turn on horizontal oscillation, press the OSCILLATE
button. You can control the vertical flow by manually
adjusting the vertical louvres on the Evaporative Cooler.
7.
To utilise the humidifying function, fill the Cold PAK with cold water then place in the freezer until they are
frozen. Next, place inside the water tank. This will lower the water temperature, and the Evaporative Cooler
will begin to humidify the air.
Figure: 1
Figure: 2
