Lenoxx DVD3460N, Инструкция по эксплуатации, Страница: 10 / 14

SYSTEM SETUP:
Menu operation
Press the SETUP button on the remote control to display the Setup (Main) Menu.
1. Once the Setup Menu is on display, use the LEFT and RIGHT buttons to select an option,
then press ENTER to enter the sub-menu.
Press the UP and DOWN buttons to select the desired setting then press ENTER to confirm
your selection.
2. To exit the Setup Menu, press the SETUP button again.
Note: The items in gray cannot be changed.
General setup page

OSD Language
Select the on-screen display language.

Subtitle, Audio, Menu
These are your initial settings and will only work if the disc supports these functions (will
default to the disc value if not supported).
 Version
Software information.
Display setup page

Aspect Ratio
16:9 : Use this aspect ratio when the unit is connected to the wide screen TV set.
4:3 / LB : Use this aspect ratio when the unit is connected to a normal TV set. Black bars will
appear on the top and bottom of the screen.
4:2 / PS : Use this aspect ratio when the unit is connected to a normal TV set. The wide screen
image will be shown on the full screen but some parts will be cut off.