4. Press the PLAY button to listen to the tape.
5. With the STOP/EJECT button you can stop play-back.
6. Wind the tape forwards or backwards in the direction of the arrow buttons.
F.FWD = forwards, RWD = reverse.
7. Always press the STOP/EJECT button when changing the direction or stopping the tape.
This prevents damage to the machine and the tape.
8. If the STOP/EJECT button is pressed again the flap of the cassette compartment opens.
9. In order to interrupt playback briefly, press the PAUSE button. Pressing again continues
playback.
Recording Cassettes
1. Insert an audio cassette with the side on which you wish to record facing forwards (full
reel on the right).
Ensure that the cassette is not copy-protected (the copy protection tab on the top narrow
side of the cassette must not have been removed).
2. Select the source from which you wish to record with the function switch and then start
playback from this source if necessary. The sound source which you are listening to is the
one from which the recording is made. The recording level is controlled automatically.
Changing the volume does not change the recording.
3. Please press the “RECORD” button (the PLAYBACK button is automatically pressed down
at the same time). Recording now begins. All previous recordings are automatically erased.
4. The recording can be interrupted briefly using the PAUSE button or stopped by means of
the STOP/EJECT button.
Playing CD
1. Set the “FUNCTION” selector to “CD” mode.
2. Open the CD door and place a CD disc with the label up on the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside. Total number of tracks is read and appears on
the display.
5. Press the “PLAY / PAUSE” button to start playing the CD.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8. In order to remove a CD, please press the “STOP” button, open the CD compartment and
lift the CD out carefully.
Always keep the CD door closed.
