background image

IB-CD968(CDM85B-60F9)-WM-E-010705

IMPORTANT INFORMATION REQUIRED BY THE FCC

SAFETY  CERTIFICATION

This  Compact  Disc  Player  is  made  and tested  to  meet  safety standards  of  the  FCC

requirements and compliance with safety performance of the U.S. Department of Health

and  Human  Services,  and also  with  FDA  Radiation  Performance  Standards  21  CFR
Subchapter  J.

WARNING

To prevent  fire or  shock hazard,  do not  expose  this  appliance  to  rain or  moisture.

Since the CD circuitry  may cause interference to other radios  nearby, switch this set

off when not in use  or move it away from  the affected radios.

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the

following two conditions: (1) This device may not cause harmful interference, and (2)

This  device  must  accept  any interference  received,  including  interference  that  may

cause undesirable  operation.

NOTE:

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a

Class  B digital  device, pursuant  to Part  15  of  the  FCC  Rules.  These  limits

are designed  to  provide  reasonable protection  against  harmful  interference

in a  residential  installation.  This equipment  generates,  uses  and  can  radiate

radio frequency energy  and, if not installed and used in accordance with the

instructions,  may  cause  harmful  interference  to radio  communications.

However,  there  is  no  guarantee  that  interference  will  not  occur  in  a

particular  installation.  If  this equipment  does  cause  harmful  interference  to

radio  or  television  reception,  which  can  be  determined  by  turning  the

equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient  or  relocate  the receiving  antenna.

Increase  the separation  between  the  equipment  and  receiver.

 Connect the equipment into an outlet on a circuit different from that to which

the  receiver is  connected.

Consult  the  dealer  or  an  experienced  radio/TV  technician  for  help.

LASER  SAFETY

THIS  SET  EMPLOYS  AN  OPTICAL  LASER  BEAM  SYSTEM  IN  THE  CD  MECHANISM,
DESIGNED  WITH  BUILT-IN  SAFEGUARDS.  DO  NOT  ATTEMPT  TO  DISASSEMBLE.
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY  BE  HARMFUL  TO  HUMAN
EYES. THIS IS  A CLASS-1 LASER PRODUCT. USE OF  ADJUSTMENTS OTHER THAN
THOSE  SPECIFIED  HEREIN,  MAY  RESULT  IN  HAZARDOUS  LASER  LIGHT  BEAM
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED
BY  ANYONE  EXCEPT  QUALIFIED  SERVICE  PERSONNEL.  THE  LASER  MECHANISM
IN  THE  SET  CORRESPONDS  TO  THE  STYLUS  (NEEDLE)  OF  A  RECORD  PLAYER.
ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS COMPLETELY SAFE
WHEN  OPERATED ACCORDING TO DIRECTIONS.

16

IB-CD968(CDM85B-60F9)-WM-E-010705.pmd

2/3/2005, 5:44 PM

17

Содержание CD-968




















Отзывы: