FILTER REPLACEMENT FORCE MODE:
When using the air purifier in an environment of heavy pollution, the lifespan of the air filter
may be significantly reduced. You can change the filters even if the filter light does not
illuminate. Follow the steps below to perform a hard reset.
1. Replace the air filter as mentioned in the Filter Replacement section.
2. Plug in the air purifier and turn it on.
3. Press and hold the filter button for 3 seconds, and it will light up.
4. Press and hold the filter button again for 3 seconds, and it will turn off. The reset is now
complete.
CLEANING:
Regularly clean the inside and outside of the body to prevent dust from collecting on the
inside and outside.
1.
Always unplug the air purifier before you clean it.
2.
Wipe away dust with a soft dry cloth from the body of the air purifier.
3.
Clean the air inlet and the air outlet with a soft dry cloth.
4.
Never immerse the air purifier in water or any other liquid.
5.
Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any
part of the air purifier.
6.
The HEPA filter is NOT washable.
STORAGE:
Unplug the power cord, then wipe the air purifier clean, put the air purifier in a plastic bag
and then store it away in a dry place.
Do not rinse it under the tap.
