background image

 

 

Do not let children ride in the street, anywhere dangerous including slopes with more than 10 

degrees, streets, next to bodies of water and away from other obstacles. Use during day light 
hours or in an illuminated area is advised to avoid accidents in the dark. 

When the ride-on is running, do not place anything on the moving parts such as the motor, gear 
box, wheels or steering wheel. 

Do not drive on long or wet grass, mud, soft ground, gravel or sand. 
Do not drive neat anything flammable or explosive. Keep any hazardous chemicals out of the 

drivers reach. 
The vehicle can be driven at a maximum of 3km/h. 

Always keep child in view when child is using the ride-on. 
This toy should be used with caution since skill is required to avoid falls or collisions causing injury 
to the user or third parties. 
Protective equipment should be worn. 
Never  use  in  roadways,  near  cars,  on  or  near  steep  inclines  or  steps,  swimming  pools  or  other 
bodies of water. 
Always wear shoes. 
Always sit on the seat. 
Not to be used in traffic. 
This ride-on has no brake. 

 

2.

 

CONNECTING THE BATTERY: 

The battery is located under the seat. 
To access, remove the screw holding the heat down and then take the seat off the body. 
* Take the gear box out of the compartment and keep it aside. * 

 

Plug the red connector onto the red terminal of the battery. Plug the black connector onto the 
black terminal of the battery.   

If the battery is not connected and you charge the ride-on, the battery will not be charging. 

Содержание 90403B




















Отзывы: