![Lenoxx 6106 Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/lenoxx/6106/6106_user-manual_1881621006.webp)
INSTALLING THE DIGGER OPERATING ARM:
Connect the lead from the operating arm to the
lead from the front body of the ride-on.
Add the operating arm into the installation
position, so that the white stud corresponds with
the correct position.
The lead can be pushed/poked gently through the
threading hole next to the stud.
At the same time, align the pressure spring with
the prop in the operating arm, apply vertical
force to press down and penetrate through the
shaft.
Tighten the screw to fix it into position.
INSTALLING THE BUCKET:
Remove the 4 x screws attached to the bucket.
Install the push bucket to the front end of the operating arm and
then add the 4 x screws.