OPERATING ON TV
You may enjoy your TV or radio sound
without disturbing others by a mono
earphone (not included).
USING A EARPHONE
7
MONO EARPHONE
IB-TV504-E-V1
1. Selecting Band
Turn on the TV set by sliding the POWER switch to ON position. Then you may select
a desired band by sliding the BAND selector to different positions:
VL: to select the VHF low channel TV broadcast stations (channels 2 to 6)
VH: to select the VHF high channel TV broadcast stations (channels 7 to 13)
UHF: to select the UHF all channel TV broadcast stations (channels 14 to 83)
2. Tuning into Desired Station
You may tune into a desired station by adjusting the TUNING control.
3. Adjusting for Best Picture
If the picture is too bright or too dark, adjust the BRIGHTNESS and CONTRAST
controls (located on the rear of the unit).
4. Vertical Hold
If the picture rolls up and down, adjust the VERTICAL HOLD control on the rear of
the unit.
5. Volume Level
You may adjust the VOLUME control to get the sound level you like.
