IB-9190M(MX)-WM-E-090902
TO INSERT THE TAPE
CAUTION:
Do not pull the door too strongly or you may
damage the door, treat this set with care
and it will last a long time.
--- 3 ---
TAPE PLAY
1. Check whether or not the tape is tight before it is
inserted.
2. Open the cassette door by hand, face the side to be played
toward you, and insert the cassette tape. Close the cassette
door.
3. Connect the headphones to the HEADPHONE jack
and adjust the headphone band for proper fit.
4. Press the PLAY button.
5. Adjust the VOLUME to control the sound level as you
like.
6. To skip portions of the cassette tape, press the FAST
FORWARD button.
7. To stop playing the cassette tape, press STOP button,
and the power source is also turned off.
(This set has a built-in auto-stop and the tape mechanism
will stop playing and shut off when it reaches the end of
the tape.)
8. To hear the other side of tape, flip it over and press
PLAY.
To keep the tape from tangling,
firmly wind the tape before
inserting it into the player.
TO HEAR THE SAME SONG AGAIN
1. Open the cassette door by holding the door as
shown and gently pulling it to you.
2. Insert the tape into the cassette holder
ON THE
DOOR.
3. Close the cassette door gently till it clicks shut.
1. Remove the tape, flip it around to the other side and insert it.
2. Press FAST FORWARD button for a short time.
3. Remove tape, flip it around to the original side, re-insert and
press PLAY.
TAPE PLAYING
DIRECTION
FULL REEL ON
THE RIGHT SIDE
Use of a cassette with more
than 90 minutes, such as C-
120 (120 minutes), is not
recommended. The extreme
thinness of this tape may
damage this set.
