40
YOGA 710-11ISK/YOGA 710-11IKB Hardware Maintenance Manual
1060 System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• During the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface, such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
•
•
“1020 Battery pack” on page 35
•
“1030 Solid state disk” on page 36
•
•
“1050 PCI Express Mini Card for wireless LAN” on page 38
Figure 6. Removal steps of system board
Disconnect the six connectors (touchpad connector, keyboard connector,
speaker connector, DC-in cable connector, EDP cable connector, microphone
and touch panel cable connector) in the directions shown by arrows
1
,
2
,
3
and
4
.
3
1
2
1
2
4
3
4