Lenovo V50t Gen 2, Руководство по техническому обслуживанию аппаратной части

Страница: 61 / 86

Removal steps
Hard disk drive
Prerequisite
Before you start, read Generic Safety and Compliance Notices , and print the following instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Remove the computer cover. See “Computer cover” on page 54.
2. Remove the front bezel. See “Front bezel” on page 54.
3. Remove the optical drive, if any. See “Optical drive” on page 55.
4. Remove the drive bay assembly. See “Drive bay assembly” on page 56.
5. Disconnect the signal cable and the power cable from the hard disk drive.
Chapter 6
.
Hardware removal and installation
57