Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On-Screen Display (OSD) is not displayed.
Icon
Control
Description
1
Microphone Mute/Un
mute Control
Turn on/off the integrated microphones
Press and hold for 3 seconds to switch the video input
Input Source
source when monitor is working on the support timing,
otherwise press to switch the video input source
Exit
Exit and return to previous level
2
Call Answer/End
Answer/end Lync Call
Left browsing key
Decrease/Left
For decreasing the value on adjustment bar/tune in
Press to move to last item
3
One Switch Toggle
Press to switch between the USB input sources
Right browsing key
Increase/Right
For increasing the value on adjustment bar/tune in
Press to move to next item
DDC-CI
Press and hold for 10 seconds to enable or disable the
DDC-CI function
4
To access OSD menu
Menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/un-lock
menu
Enter
Press to enter next level on main menu/sub menu status
or enter previous level on adjustment bar
5
Volume Up/Down
Press to control Speaker Volume up/down
Chapter 2.
2-3