Lenovo ThinkSystem D3284 Скачать руководство пользователя страница 35

Страница: 35 / 159

5U enclosure chassis

The 2U enclosures use a redundant PCM that integrates a power supply and cooling fan within the same CRU

module, as shown in

Figure 22 (page 30)

. Conversely, the 5U enclosures use separate CRU modules for power

supply and cooling/circulation, respectively.

Figure 28

shows the power supply module, which provides the enclosure with power connection and a power

switch.

Figure 29 (page 35)

shows the fan cooling module used in 5U enclosures. The FCM is smaller than the

PCM, and five of them are used within the 5U84 to provide sufficient airflow throughout the enclosure.

Fan cooling module

Figure 29

shows the fan cooling module (FCM) used in optional 5U expansion enclosures.

Figure 29 Fan cooling module (FCM) detail

5U enclosure chassis

The 5U chassis consists of a sheet metal enclosure with an integrated midplane PCB, module runner system, and

two drawers for drive modules.

NOTE:

Supported 5U chassis form factors used for configuring EBODs:

•

5U84 chassis configured with up to 84 LFF disks in DDICs: see

Figure 26 (page 33)

•

5U84 chassis configured with SFF disks in SFF disks in 2.5" to 3.5" hybrid driver carrier adapter.

•

5U84 empty chassis with midplane, module runner system and drawers.

•

The chassis has a 19-inch rack mounting that enables it be installed onto standard 19-inch racks, and uses five

EIA units of rack space (8.75") for a 5U enclosure.

•

At the front of the enclosure two drawers can be opened and closed. Each drawer provides access to 42 slots for

Disk Drive in Carrier (DDIC) modules. DDICs are top mounted into the drawers as shown in the drawer

diagram on

page 33

. The front of the enclosure also provides enclosure status LEDs and drawer status/activity

LEDs.

•

At the rear of the enclosure, access is provided to rear panel CRUs: two SBB-compliant IOMs; two PSUs; and

five fan cooling modules.

5U enclosure drawers

Each enclosure drawer contains 42 slots, each of which can accept a single DDIC containing a 3.5" LFF disk drive

or a 2.5" SFF disk drive with an adapter. See

Figure 25

and

Figure 26 (page 33)

Содержание ThinkSystem D3284
































































































































































Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkSystem D3284, Руководство по установке и обслуживанию оборудования

Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Бренды по названию

Популярные бренды