Lenovo ThinkSTaTion series, Руководство по установке

Страница: 27 / 62

Installing a drive for bay 1
To install the optical drive for bay 1:
1.
Open the computer cover. See “Opening the cover” on page 12.
2. Remove the front bezel. See “Removing the front bezel” on page 14.
Note: On the inside of the front bezel where the drive is to be located there is a
drive adapter plate for installing new drive. Remove the drive adapter plate
and use it to install the drive.
3. Remove the plastic drive cover from the bezel.
4. For drive bay one, remove the static shield (for bay one the static shield just
pulls out).
5. Install the adapter plate on the left side of the drive to be installed.
6.
Slide the drive into the bay until it locks into position.
7. Connect the drive cables.
8. Install the front bezel.
What to do next:
v
To work with another option, go to the appropriate section.
v
To complete the installation, go to Chapter 4, “Completing the parts
replacement,” on page 43.
Figure 9. Installing an optical drive
Chapter 3. Installing options and replacing hardware
19