Lenovo ThinkStation P910, Руководство по техническому обслуживанию аппаратной части

Страница: 82 / 244

1. Click Configuration Wizard on the WebBIOS main screen to enter the Choosing the Configuration
Type window.
2. Press the up and down arrow keys to select one of the three configuration types:
• Clear Configuration : Clear the existing configuration.
• New Configuration : Clear the existing configuration and create new configuration.
• Add Configuration : Retain the existing storage configuration and add new hard disk drives. The
new configuration will not cause any data loss.
3. Select Add Configuration , and then click Next . The following two options are displayed in the
Configuration Method window.
• Manual Configuration : Manually create hard disk drive groups and virtual hard disk drives, and
set parameters.
• Automatic Configuration : Automatically create an optimal RAID configuration.
4. Select Manual Configuration , and then click Next . The Drive Group Definition window is displayed. To
create hard disk drive groups, do the following:
a. Select one or more hard disk drives for the group (keep pressing Ctrl while selecting more than
one hard disk drive).
b. Click Add To Array to move the selected hard disk drives to Drive Groups .
c. Click Accept DG to create the hard disk drive group.
d. Repeat the above steps if you want to create more than one hard disk drive group.
5. Click Next . The Span Definition window is displayed. Select the hard disk drive group that you want
to add to a span, and then click Add to SPAN . Repeat this step until you have selected all the hard
disk drive groups you want.
6. Click Next . The Virtual Drive Definition window is displayed. Change the virtual hard disk drive options
from the default settings listed on the screen to the settings you want. Click Accept , and then follow
the instructions on the screen to customize your settings.
7. Click Next , and the Preview window is displayed.
8. Verify your settings, and then click Accept .
9. Click Yes to save the configuration.
Deleting RAID volumes using the AVAGO MegaRAID BIOS configuration utility
This section provides instructions on how to delete RAID volumes using the AVAGO MegaRAID BIOS
configuration utility.
To delete RAID volumes using the AVAGO MegaRAID BIOS configuration utility, do the following:
1. Enter the AVAGO MegaRAID BIOS configuration utility. Refer to “Entering the AVAGO MegaRAID
BIOS configuration utility” on page 75.
2. Click the virtual hard disk drives you want to delete, and then the Virtual Drive window is displayed.
3. Click Delete , and then click Go .
4. Click Yes to save your changes.
Setting the hot spare hard disk drive
This section provides instructions on how to set the hot spare hard disk drive.
To set the hot space hard disk drive, do the following:
1. Enter the AVAGO MegaRAID BIOS configuration utility. Refer to “Entering the AVAGO MegaRAID
BIOS configuration utility” on page 75.
76
P910 Hardware Maintenance Manual