Lenovo ThinkStation P900 Скачать руководство пользователя страница 162

Страница: 162 / 218

8. Pivot the handle

to the right until it stops, and then press it downward until the latch

snaps into

position.

Figure 69. Closing the PCI card latch

9. If the new PCI card needs to be connected to other device, connect the cable of the device to the card.

10. Reinstall the direct cooling air baffle if you have removed it. See “Removing and reinstalling the direct

cooling air baffle” on page 128.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 183.

Installing or replacing a full-length PCI Express card

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

Your computer has the following PCI card slots:

• PCI Express x1 card slot

• PCI Express x4 card slot

• PCI Express x16 graphics card slot

Notes:

• The full-length PCI Express card is available only in some models.

• If you want to use an NVIDIA compute card, ensure that your computer also has an NVIDIA graphics

card installed.

154

ThinkStation P900 Hardware Maintenance Manual

Содержание ThinkStation P900



























































































































































































































Результаты поиска

Содержание ThinkStation P900

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkStation P900, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkStation P900

Отзывы:

Бренды по названию

Популярные бренды