Lenovo ThinkServer TS460, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 99 / 172

Non-hot-swap power supply
This topic applies only to server models that come with a non-hot-swap power supply.
• “Removing the non-hot-swap power supply” on page 85
• “Installing the non-hot-swap power supply” on page 86
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with
one of these parts, contact a service technician.
Removing the non-hot-swap power supply
To remove the non-hot-swap power supply, do the following:
1. Prepare your server and remove the server cover. See “Preparing your server in advance and removing
the server cover” on page 57.
2. Disconnect cables from the non-hot-swap power supply.
Chapter 5
.
Replacing hardware
85