Lenovo ThinkServer TD350 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 122

background image

Chapter 3. Installing an operating system in UEFI mode

This chapter provides information about installing operating systems in UEFI mode.

Before installing an operating system in UEFI mode

This topic contains the following items:

• “Preparing the driver” on page 61

• “Configuring the BIOS setting” on page 61

Preparing the driver

Before installing an operating system in UEFI mode, download your desired driver from the Lenovo Web site
at

http://www.lenovo.com/drivers

. Then, copy the driver to a USB storage device.

If the operating system is installed on a storage area network (SAN), download the driver for the host bus
adapter (HBA) or converged network adapter (CNA) that is connected to the SAN. Then, copy the driver to a
USB storage device.

Notes:

• You can load driver files using a USB storage device or a disc. The steps in this document are based on

the scenario that you use a USB storage device to load driver files. If the USB storage device fails to load
driver files, try using a disc. If you are installing an SUSE operating system, you are advised to use a disc
to load .iso driver files.

• Depending on the configuration, you might install the operating system on a SAN or a hard disk drive. For

Microsoft Windows operating systems, the two installation procedures are the same.

• Set the UEFI drive as the first startup device.

Configuring the BIOS setting

Before installing an operating system in UEFI mode, configure the BIOS setting by doing the following:

1. Start the Setup Utility program.

2. On the

Boot Manager

menu, select

Miscellaneous Boot Settings

and press Enter.

3. On the

Storage OpROM policy

menu, select

UEFI only

.

Installing the Microsoft Windows Server 2008 R2 operating system with
Service Pack 1

This topic provides information about installing the following operating systems:

• Microsoft Windows Server 2008 R2 Datacenter Edition with Service Pack 1 (x64)

• Microsoft Windows Server 2008 R2 Enterprise Edition with Service Pack 1 (x64)

• Microsoft Windows Server 2008 R2 Foundations Edition with Service Pack 1 (x64)

• Microsoft Windows Server 2008 R2 Standard Edition with Service Pack 1 (x64)

For instructions on how to install the Microsoft Windows Server 2008 R2 operating system with Service Pack
1, see “Installing the Microsoft Windows Server 2008 R2 operating system with Service Pack 1” on page 5.

© Copyright Lenovo 2014, 2018

61

«
...
65
66
67
68
69
...
»

Содержание ThinkServer TD350



























































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer TD350

Бренд: B&B Electronics Страницы: 67

Бренд: SMC Sierra Monitor Страницы: 42

Бренд: IBM Страницы: 66

Бренд: Buffalo Страницы: 2

R120d-1E N8100-1954F

Бренд: NEC Страницы: 166

Бренд: BlueNet Video Страницы: 38

EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренд: Edimax Страницы: 118

Бренд: Premio Страницы: 2

ProLiant DL380 Gen9

Бренд: HPE Страницы: 8

Бренд: Asus Страницы: 150

RS300-E6 Series

Бренд: Asus Страницы: 162

RS161-E5 - 0 MB RAM

Бренд: Asus Страницы: 124

Бренд: Asus Страницы: 126

Бренд: Asus Страницы: 182

Бренд: Asus Страницы: 164

Бренд: Asus Страницы: 178

RS120-E4 - 0 MB RAM

Бренд: Asus Страницы: 174

Бренд: Asus Страницы: 176

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды