Lenovo ThinkServer RS160, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения, Страница: 85 / 142

3. Lift the release pin 1 on the slim-optical-drive bracket. Meanwhile, slide the bracket to the rear of
the server as shown to release the bracket from the chassis. Then, lift the slim-optical-drive bracket
out of the chassis.
Figure 47. Removing the slim-optical-drive bracket
Installing the slim-optical-drive bracket
To install the slim-optical-drive bracket, do the following:
1. Position the bracket in the chassis, align the four slots in the bracket with the mounting studs on the
chassis, and then slide the bracket to the front of the server until the pin 1 is snapped into position.
Figure 48. Installing the slim-optical-drive bracket
2. Reinstall the slim optical drive if you have removed it. See “Installing the slim optical drive” on page 62.
Chapter 5
.
Replacing hardware
71