Lenovo ThinkServer RS160, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения, Страница: 76 / 142

3. Loosen the thumbscrew 1 that secures the slim-optical-drive retainer and then remove the retainer from
the chassis. Then, slide the slim optical drive out of the front of the server.
Note: The thumbscrew is an integrated part of the slim-optical-drive retainer. Do not try to remove the
thumbscrew from the retainer.
Figure 36. Removing the slim optical drive
4. Install a new slim optical drive or a metal bezel to protect the drive bay. See “Installing the slim optical
drive” on page 62.
5. If you are instructed to return the old slim optical drive, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
To complete the parts replacement, go to “Completing the parts replacement” on page 95.
Installing the slim optical drive
To install the slim optical drive, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
2. Do one of the following:
• If the server is installed with an old slim optical drive, remove the drive. See “Removing the slim
optical drive” on page 61.
• If the slim-optical-drive bay is protected with a metal bezel, do the following:
62
ThinkServer RS160 User Guide and Hardware Maintenance Manual