
Note:
Before replacing the system board, make sure you have a retention module for the new system board.
To replace the system board, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the server cover” on page 33.
3. Place the computer on its side to gain easier access to the system board.
4. Remove all memory modules and PCI cards that are currently installed. See “Installing or removing a
memory module” on page 39 and “Installing or replacing a PCI card” on page 35.
5. Remove the heat sink and fan assembly from the failing system board. See “Replacing the heat sink and
fan assembly” on page 52.
6. Remove the microprocessor from the failing system board. See “Replacing the microprocessor” on
page 59.
7. Remove the battery from the failing system board. See “Replacing the system board battery” on page 62.
8. Remove the front fan assembly from the computer. See “Replacing the front fan assembly” on page 55.
9. Note the location of all cable connections on the system board and disconnect all cables. See “Locating
parts on the system board” on page 26.
10. Remove the eight screws that secure the system board to the chassis by following the sequence shown
in the following illustration.
11. Carefully lift the failing system board out of the chassis.
12. Position the new system board into the chassis so that the screw holes in the new system board are
aligned with those in the chassis. Install the eight screws that secure the system board to the chassis in
the reverse order that they were removed; that is, install the screw
8
first and install the screw
1
last.
13. Remove the microprocessor socket cover from the new system board.
14. Install the memory modules, PCI cards, battery, microprocessor, and heat sink and fan assembly that
you removed from the failing system board to the new system board.
15. Connect all cables to the system board. See “Locating parts on the system board” on page 26.
64
ThinkServer TS130 Hardware Maintenance Manual
Содержание ThinkServer 1098
