Lenovo ThinkPad X13 Gen 2 Скачать руководство пользователя страница 5

Страница: 5 / 126

About this manual

This manual contains service and reference information for the following ThinkPad

products:

ThinkPad T14s Gen 2

Machine types (MT): 20WM, 20WN, 20XF, and 20XG

ThinkPad X13 Gen 2

Machine types (MT): 20WK, 20WL, 20XH, and 20XJ

Use this manual along with the advanced diagnostic tests to troubleshoot problems.

Important:

• This manual is intended only for trained service technicians who are familiar with ThinkPad products. Use

this manual along with the advanced diagnostic tests to troubleshoot problems effectively.

• Depending on the model, some hardware configuration and software programs might not be available on

the computer. Some statements in this manual might not be applicable to the computer.

• Before servicing a ThinkPad product, be sure to read all the information under Chapter 1 “Safety

information” on page 1 and Chapter 2 “Important service information” on page 21.

• ThinkPad T14s Gen 2 and ThinkPad X13 Gen 2 might be shipped with different microprocessors, namely

Intel

and Advanced Micro Devices (AMD). Hereby Intel models and AMD models are used to distinguish

computer models with different microprocessors.

iii

Содержание ThinkPad X13 Gen 2































































































































Результаты поиска

Содержание ThinkPad X13 Gen 2

Отзывы:

Lenovo ThinkPad X13 Gen 2, Руководство по техническому обслуживанию аппаратной части, Страница: 5 / 126

Результаты поиска

Содержание ThinkPad X13 Gen 2

Отзывы: