Lenovo ThinkPad Ultrabay 9.5-mm DVD Burner IV, Руководство пользователя

Страница: 11 / 34

Chapter 3. Using the drive
This chapter provides information on how to use the drive.
Before you begin
Before you use the drive, be sure to read the following precautions:
• Do not move your computer while formatting or writing to a disc, as this might cause data errors.
• Minimize typing while formatting or writing to a disc, as this might cause data errors.
• Keep your computer on a flat surface when writing to a disc.
• Ensure that your computer is plugged into an outlet when using the drive. The disc might be damaged if
the battery runs out while writing to a disc.
• Turn screensavers off. Using a screensaver might interrupt the formatting and writing process.
• Do not put your computer into hibernation or suspend mode while writing to a disc.
Note: The read and write results of the drive depends on the quality and characteristics of the DVD or
CD media used.
Loading a disc
This topic provides instructions on how to load a disc.
To load a disc, do the following:
1. Press the Eject button. The disc tray slides out of the drive.
2. Place a disc in the disc tray with the label facing up.
3. Close the disc tray by gently pushing the disc tray in until it latches.
Attention: Do not use force or insert foreign objects to open the disc tray. If the disc tray does not open
when you press the Eject button, see “Manually opening the disc tray” on page 5.
Manually opening the disc tray
To manually open the disc tray, do the following:
1. Turn off your computer.
2. Straighten a paper clip with the straightened end extending at least 45 mm (1.8 inches).
Figure 2. The straightened paper clip
3. Insert the straightened end of the paper clip into the manual eject hole (see “Locating controls” on page
2), and push the paper clip into the hole until the disc tray opens.
© Copyright Lenovo 2013 5