Lenovo ThinkPad R51, Дополнительное руководство

Страница: 52 / 104

To recover the hard disk to its original contents, do the following:
Note: The recovery process might take up to 2 hours.
Attention:
All of the files on the primary hard disk partition (usually drive C)
will be lost in the recovery process. However, before any data is overwritten,
you will be given the opportunity to save one or more files to other media.
1. If possible, save all your files and shut down your operating system.
2. Turn off your computer for at least 5 seconds.
3.
Turn on your computer. Watch the display carefully. While the message,
“To interrupt normal startup, press the blue Access IBM button” is
displayed at the lower left of the screen, press the Access IBM button. The
Rescue and Recovery workspace opens.
4. Click Restore your system .
5. Click Restore my hard drive to the original factory state and then click
Next .
6. Follow the instructions on the screen.
7. When the recovery process finishes, press Enter key. Your computer will
restart with the pre-installed operating system, drivers, and software.
Upgrading the hard disk drive
You can increase the storage capacity of your computer by replacing the hard
disk drive with one of greater capacity. You can purchase a new hard disk
drive from your reseller or Lenovo marketing representative.
Notes:
1. Replace the hard disk drive only if you upgrade it or have it repaired. The
connectors and bay of the hard disk drive were not designed for frequent
changes, or drive swapping.
2.
The optional hard disk drive does not contain the Rescue and Recovery
workspace and the Product Recovery program.
Recovering pre-installed software
30
ThinkPad
®
R51e Series Service and Troubleshooting Guide