Lenovo ThinkCentre M920s Скачать руководство пользователя

Страница: 59 / 80

Figure 91. Installing the Wi-Fi card shield

6. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on

page 68.

Replacing the Wi-Fi antennas

Attention:

Do not open your computer or attempt any repairs before reading the

Important Product

Information Guide

1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all

power cords from electrical outlets and disconnect all cables from the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 17.

3. Remove the front bezel. See “Replacing the front bezel” on page 18.

4. Pivot the drive bay assembly upward. See “Pivoting the drive bay assembly upward and downward” on

page 19.

5. Disconnect the antenna cables from the Wi-Fi card.

6. Replace the Wi-Fi antennas.

• Front Wi-Fi antenna

Chapter 4

Replacing hardware

Содержание ThinkCentre M920s

















































































Результаты поиска

Содержание ThinkCentre M920s

Отзывы:

Похожие инструкции для ThinkCentre M920s

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M920s, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkCentre M920s

Отзывы:

Похожие инструкции для ThinkCentre M920s

Бренды по названию

Популярные бренды