Lenovo ThinkCentre M76 Скачать руководство пользователя страница 73

Страница: 73 / 214

Message/Symptom

FRU/Action

Serial or parallel port device failure (adapter port)

1. External Device Self-Test OK?

2. External Device

3. Cable

4. Alternate Adapter

5. System Board

Some or all keys on the keyboard do not work

1. Keyboard

2. Keyboard Cable

3. System Board

Undetermined problems

If you encounter undetermined problems, do the following:

1. Turn off the computer and the power.

2. Remove or disconnect the following components (if installed) one at a time.

a. External devices (modem, printer, or mouse)

b. Any adapter cards

c. Memory modules

d. Extended video memory

e. External Cache

f. External Cache RAM

g. Hard disk drive

h. Diskette drive

3. Turn on the power and the computer to re-test the system.

4. Repeat steps 1 through 3 until you find the failing device or adapter cards.

If all devices and adapter cards

have been removed, and the problem continues, replace the system board. See “Replacing the system
board” on page 98 or “Replacing the system board” on page 148.

Chapter 7

Symptom-to-FRU index

Содержание ThinkCentre M76























































































































































































































Результаты поиска

Содержание ThinkCentre M76

Отзывы:

Lenovo ThinkCentre M76, Руководство по техническому обслуживанию аппаратной части, Страница: 73 / 214

Результаты поиска

Содержание ThinkCentre M76

Отзывы: