Lenovo THINKCENTRE 9120, Руководство по замене

Страница: 31 / 62

Replacing the battery
Your computer has a special type of memory that maintains the date, time, and
settings for built-in features, such as parallel-port assignments (configuration). A
battery keeps this information active when you turn off the computer.
The battery normally requires no charging or maintenance throughout its life;
however, no battery lasts forever. If the battery fails, the date, time, and
configuration information (including passwords) are lost. An error message is
displayed when you turn on the computer.
Refer to the "Lithium battery notice" in the Safety and Warranty Guide for
information about replacing and disposing of the battery.
This section provides instructions on how to replace the battery.
1.
Turn off the computer and disconnect the power cord from the electrical outlet
and from the computer.
2. Remove the computer cover. See “Removing the cover” on page 11.
3. Locate the battery. See “Identifying parts on the system board” on page 9.
4. Remove the old battery.
5. Install the new battery.
6.
Replace the computer cover, and connect the cables. See Chapter 4,
“Completing the parts replacement,” on page 43.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is normal after
replacing the battery.
7. Turn on the computer and all attached devices.
8. Use the Setup Utility program to set the date and time and any passwords. See
"Using the Setup Utility" in your User Guide .
Figure 17. Removing the battery
Figure 18. Installing the battery
Chapter 3. Installing options and replacing hardware
23