Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 169 / 296

xcc_password
The BMC/IMM/XCC account password (1 of 12 accounts). The default value is
PASSW0RD (with a zero 0 not an O).
Note:
BMC, IMM, or XCC internal LAN/USB IP address, account name, and password are
all valid for this command.
Examples that do use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> --host <xcc_ip>
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> --host <xcc_ip>
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> --host <xcc_ip>
Step 2. Reset IMM to the factory defaults. Go to
https://sysmgt.lenovofiles.com/help/topic/
com.lenovo.systems.management.xcc.doc/NN1ia_c_resettingthexcc.html
for more information.
Step 3. Reset the Lenovo XClarity Controller to the factory defaults. Go to
https://sysmgt.lenovofiles.com/
help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_resettingthexcc.html for more
information.
Enable TPM/TCM
The server supports Trusted Platform Module (TPM), Version 1.2 or Version 2.0
Note:
For customers in Chinese Mainland, TPM is not supported. However, customers in Chinese Mainland
can install a Trusted Cryptographic Module (TCM) adapter (sometimes called a daughter card).
When a system board is replaced, you must make sure that the TPM/TCM policy is set correctly.
CAUTION:
Take special care when setting the TPM/TCM policy. If it is not set correctly, the system board can
become unusable.
Set the TPM/TCM policy
By default, a replacement system board is shipped with the TPM/TCM policy set to
undefined
. You must
modify this setting to match the setting that was in place for the system board that is being replaced.
You can set the TPM/TCM policy from Lenovo XClarity Provisioning Manager.
Complete the following steps to set the TPM/TCM policy.
Step 1. Start the server and when prompted, press F1 to display Lenovo XClarity Provisioning Manager
Lite.
Step 2. If the power-on Administrator password is required, enter the password.
Step 3. From the System Summary page, click
Update VPD
.
Step 4. Set the policy to one of the following settings.
•
TCM enabled - Chinese Mainland only
. Customers in Chinese Mainland should choose this
setting if a TCM adapter is installed.
•
NationZ TPM 2.0 enabled - Chinese Mainland only
. Customers in Chinese Mainland should
choose this setting if a NationZ TPM 2.0 adapter is installed.
•
TPM enabled - ROW
. Customers outside of Chinese Mainland should choose this setting.
•
Permanently disabled
. Customers in Chinese Mainland should use this setting if no TCM
adapter is installed
Although the setting
undefined
is available as a policy setting, it should not be used.
Chapter 9
.
Hardware replacement procedures
159