Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 125 / 296

Figure 58. System board filler installation
Step 1. Align the system board filler with the rails in the compute tray; then, insert the system board filler,
making sure that the rails on the board fit into the slots in the compute tray.
Step 2. Slide the system board filler into the compute tray until the release clips snap into the locked
position.
After you install the system board filler, install the compute tray and front cover. See “Install a compute tray”
on page 117 and “Install the front cover” on page 132.
Upper/lower compute tray replacement
Use the following procedures to remove and install the upper or lower compute tray.
Remove a compute tray
The upper and lower compute trays are accessed from the front of the server. Open the release levers to
extract the compute tray, pressing the release tabs when it stops to remove the tray fully from the chassis.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
“ ” on page 89 “ ” on page 65
CAUTION:
Chapter 9
.
Hardware replacement procedures
115