Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 123 / 296

Remove a system board filler
Remove a system board filler by pressing the release clips on the filler, and sliding it out of the compute tray.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
“ ” on page 89 “ ” on page 65
CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Before you remove the system board filler:
1. Remove the front cover. See “Remove the front cover” on page 131.
2. Remove compute tray where the system board filler is installed. See “Remove a compute tray” on page
115.
Complete the following steps to remove the compute system board filler:
Watch the procedure
. A video of the replacement process is available:
•
YouTube
•
Youku
Figure 57. System board filler removal
Chapter 9
.
Hardware replacement procedures
113